A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units - SEAL-A/C-LEAKSTOPADDITIVE-30ML

A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units

Name: A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units
Brand: Würth
SKU: 0892764500

Air-conditioning leak stop additive
SEAL-A/C-LEAKSTOPADDITIVE-30ML

Art.-no. 0892764500

EAN 4045989644940

All versions

Similar products

Prices for customers after login

A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units

Art.-no. 0892764500

Prices for customers after login

Quantity

x 6 pcs

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.

TCP reduces wear

Longer compressor service life

Improves the compressor service life

Reduces noises developing in the compressor

(Tri-cresyl-phosphate) Additive specifically developed for vehicle air-conditioning compressors for reducing mechanical wear (friction) in the compressor (piston etc.)

Compatible with PAG and ester oil

Notice

Not suitable for sealing leaks on metallic components (evaporator, compressor, condenser etc.).

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.

Instructions

Connect the A/C leakage stop additive to the adapter, insert into the application gun and mix in via the high-pressure side of the cooling system (engine must be switched off).

Contents	30 ml
Smell/fragrance	Odourless
Chemical basis	Methylene diphenyl
Water-soluble	Yes
Vapour pressure	1.33 Pa
Conditions for vapour pressure	at 20°C
Colour	Light yellow transparent
Min. flashing point	255 °C
Density	1.02 g/cm³
Viscosity/consistency	Liquid
Shelf life from production	48 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.