Wire cable terminal With fork
Wire cable barrel terminal sst A4 fork welded
FRK-BARLTRML-WELDED-A4-D5
Register now and access more than 125,000 products
- Design: Welded
- These products have not been developed and manufactured as slings or load-bearing equipment
- Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC
- To compress wire rope terminals with a rope diameter of 2 to 6 mm, hydraulic manual crimping pliers must be used as well as the compatible crimping jaws
- Wire ropes with a diameter of 8, 10 and 12 mm cannot be compressed by hand. The use of stationary presses and/or rollers is required here
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Suitable for rope diameter | 5 mm |
Outer diameter (d2) | 9 mm |
Bolt diameter (d3) | 9 mm |
Length (l1) | 88 mm |
Fork width (inner) (l3) | 12 mm |
Fork width (outer) | 20 mm |
Fork height (h1) | 14 mm |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Angle Grinder EAG 115
Thread sealant paste
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Repair hose line, NBR/textile For non-fuel-carrying applications
Round connector RSA 2 1.65
Cockpit silicon spray
Rivet nut pliers
Quick-action lever clamp made completely of steel
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain