Vacuum pump oil

Name: Vacuum pump oil
Brand: Würth
SKU: 0892764300

Vacuum pump oil
OIL-VACPMP-A/C-250ML

Art.-no. 0892764300

EAN 4045989644346

All versions

Prices for customers after login

Vacuum pump oil

Art.-no. 0892764300

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

For maintaining the vacuum pump in air-conditioning service units

Excellent material compatibility

Rubber and plastic seals are not attacked

Notice

The oil can be mixed with all commercially available mineral oil-based vacuum pump oils.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Ideally suited to vacuum pumps - even in the high-vacuum sector

Instructions

Insert vacuum pump oil according to the machine manufacturer's specifications. The oil can be mixed with all commercially available mineral oil-based vacuum pump oils.

Chemical basis	Special oils with additives
Contents	250 ml
Weight of content	217.5 g
Smell/fragrance	Mild
Colour	Transparent, yellowish
Density	0.87 g/cm³
Min. flashing point	145 °C
Kinematic oil basis viscosity	11.2 mm²/s
Conditions for viscosity of oil basis	at 40°C
AOX-free	Yes
Shelf life from production	36 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.