Stand-off installation system AMO®-Therm
Adapt. w. thread. fitt., sst A4, AMO-Therm
ADAPT-AMOTHERM-SET-ANC-A4-80-M12/M16X320
Register now and access more than 125,000 products
Quick and easy installation
Thermal bridge-reduced element for connecting and transferring loads from the attached part to the substrate
The thermal separation adapter in a plastic cone interrupts the thermal bridge and prevents heat loss to the outside.
Secure attachment with approval for high loads in a wide range of building materials
When anchoring in a substrate with the injection mortars WIT-VM 250, WIT-VM 200 and WIT PM 200
Usable lengths from 80 to 300 mm can be covered with an AMO-Therm
Individual and flexible length setting using the adapter with commercially available threaded rods with acceptance test certificate 3.1
Datasheets(X)
CAD data (available after login)
Attachment with low thermal loss to insulated substrates indoors and outdoors, in walls, facing insulation on ceilings, non-bearing façades
e.g. awnings, canopies, post box systems, satellite systems, lighting equipment, light wells, air-conditioning units, brackets, grids, metal structures, balcony railings, balcony privacy screens, etc.
Can be used in different building materials
Solid and hollow sand-lime brick, normal and lightweight concrete, cracked and non-cracked concrete, aerated concrete, solid and vertically perforated brick
Can be used outdoors, in humid areas and close to the sea
External parts made from stainless steel.
Suitable for pre-positioned installation
Connection thread (1) | M12 |
Material of connection thread (2) | Stainless steel A4 |
Diameter threaded rod (3) | M16 |
Material of threaded rod (4) | Stainless steel A4 |
Length (5) | 385 mm |
Last viewed
O-ring, imperial NBR 70
Universal thread file For UNF thread (NF) and UNC thread (NC)
Cordless hammer drill ABH 18 COMPACT M-CUBE
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hard hat Pro-Tek 6-point
High-pressure cleaner HDR 160 Compact
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated black (A2S), with H cross recess.
Countersunk head screw with recessed head, H DIN 965, A4 stainless steel, plain
Cordless tangential impact screwdriver ASS 12-A