Separator
Separator tool
SEPRTL-SPNW115MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 22-115 mm |
Width of clamping jaw (B) | 170 mm |
Spindle length (C) | 250 mm |
Min./max. hole distance (E) | 115-208 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M14 x 1.5 |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Basic trousers
Black nylon seat cover
Wing repair washer In accordance with DIN 522, A2 stainless steel, plain
S1PL ESD Carbon 290 safety shoe
Flat nose pliers DIN ISO 5745
Wall-mounted roll holder For cleaning paper rolls with waste bag holder
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
1/2 inch socket wrench insert, metric
Standard cable tie with plastic latch