Self-tapping ventilation screw
Stainless steel A2 hexagon head with flange
SELF DRILLING HEX. HEAD SCREWS DIN7504
Register now and access more than 125,000 products
Time-saving
- Self-tapping, so predrilling is not necessary
- Hexagon head gives good power transmission from the tip to the screw
Robust, good quality
- Locking ribs ensure that the screw does not come loose due to vibration
- Reduced drill tip
- Stainless
- With flange
Datasheets(X)
Suitable for assembly of ventilation pipes/Spirotubes, ventilation ducts and thin plates in damp environments.
Standards | DIN 7504 |
Material | Stainless steel A2/steel |
Surface | Uncoated |
Head type | Hexagon head with flange |
Drive type | Hexagon |
Shape of tip | Reduced drilling bit |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 19 mm |
Flange diameter (dk) | 13.2 mm |
Drill tip length (lp) | 3.7 mm |
Screw-thread length with drill tip | 19 mm |
External drive (s1) | WS10 |
Internal drive | HX10 |
Last viewed
Bond and Seal structural adhesive
Special cable tie with metal closure and snap-in knob
1/2 inch bit sockets Assortment of 11 pieces
Oil drain plug
Summer windscreen cleaner Orange
Threaded bushing For repairing car spark plugs, TIME-SERT®
Self-tapping thread insert with cutting slot
Chipboard screw, countersunk head
O-ring, imperial NBR 70
Drill hole spray marker