Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
NUT-RIV-CS-A2-(0,5-3,0)-10,0X5,9-M4
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M4 |
Length (l1) | 10 mm |
Head diameter (d1) | 7 mm |
Outer diameter (d2) | 5.9 mm |
Head height (k1) | 0.9 mm |
Min./max. grip range (s1) | 0.5-3 mm |
Tensile fracture load | 6860 N |
Shear-fracture load | 2940 N |
Max. tightening torque | 9 Nm |
Drill hole diameter | 6 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Last viewed
3/8" socket wrench insert For external TX screws, short
Pass-through reversible ratchet
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Cordless impact driver ASS 18-1/4 inch COMPACT M-CUBE
MFD-S multi-purpose drill bit with straight shank
TX screwdriver with round shank
Winter diesel performance improver
Screw cap for number plate screw
Deodoriser
Drop-in anchor W-ED/S