Retouching paint pens, assortment - RETCHPEN-SORT-LACQUER-10PCS

Retouching paint pens, assortment

Name: Retouching paint pens, assortment
Brand: Würth
SKU: 09648901

Retouching paint pen assortment
RETCHPEN-SORT-LACQUER-10PCS

Art.-no. 09648901

EAN 4011231883771

All versions

Prices for customers after login

Retouching paint pens, assortment

Art.-no. 09648901

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Easy and quick to apply

No brush and paint pot required

Ready to use immediately and quick-drying

Large selection of colours for a wide range of different wood colour tones.

Good adhesion

Adheres to a range of surfaces, making it suitable for universal use

Resistant to smearing and scratch-resistant

Suitable for indoor and outdoor use

Notice

The retouching pens are not refillable.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For recolouring and covering edges, scratches, chafe marks, minor touch-up defects and mitre grooves as well as correcting wood colours. Optimum paint quality for a continuous flow of paint. For both indoor and outdoor use.

Instructions

Shake the pin for approx. 30 seconds before use. The stirring balls must be clearly audible. Remove the pen lid and hold the pen with the tip pointing upwards. The pen is audibly vented by briefly pressing on "P". Then point the tip downwards to activate the pen. The tip is slowly filled with paint by carefully pressing on "P". Apply light pressure to use the pen at a flat angle (approx. 45°). The valve opens and the paint flows evenly and continues to do so. During application, avoid pressing on "P", as this can lead to an uncontrolled flow of paint. Thanks to the new shape of the tip, it is also easy to work hard-to-reach areas (corners, narrow areas) with precision.

Density	0.94 g/cm³
Density conditions	at 20°C
Min. grip strength	2 min
Max. grip strength	5 min
Grip strength conditions	depending on room temperature and layer thickness
Min. dust-drying time	1 min
Max. dust-drying time	2 min
Conditions for dust-drying time	depending on room temperature and layer thickness
Ignition temperature	350 °C
Min. flashing point	19 °C
Number of pieces in assortment/set	10 PCS
Light-fastness	Good
Water-soluble	No
Shelf life from production	24 Month

Retouching paint pens, assortment including:

1 x

Paint retouching pen

RETCHPEN-LACQUER-SIGNALWHITE-11G

Art.-no. 0890403501

Description:

Colour: Signal white

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-MAPLE-NATURE-11G

Description:

Colour: Maple

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-PINE-11G

Description:

Colour: Pine

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-BEECH-LIGHT-11G

Description:

Colour: Beech, light

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-ALDER-DARK-HONEY-11G

Description:

Colour: Alder

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-CHERRYTREE-MIDDLE-11G

Art.-no. 0890403506

Description:

Colour: Cherry tree

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-PEARTREE-MIDDLE-11G

Description:

Colour: Pear

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-RUSTIC-OAK-11G

Art.-no. 0890403508

Description:

Colour: Oak, rustic

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-WALNUT-ANTIQUE-11G

Description:

Colour: Walnut

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

1 x

Paint retouching pen

RETCHPEN-LACQUER-DEEPBLACK-11G

Description:

Jet black, similar to RAL 9005

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).