Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS19MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 19 mm |
Length (L) | 248 mm |
Possible uses, 6-sided/12-sided metric | 19 mm |
Thickness of jaw (a1) | 8.8 mm |
Ring thickness (a2) | 11.2 mm |
Width of jaws (outside) (b1) | 39.3 mm |
External diameter of ring (d) | 33.7 mm |
Max. torque (F max.) | 266 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
KBL 1 self-adhesive base
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Flat cover cap, for hexalobular socket and AW drive
Vehicle dry abrasive paper disc RED PERFECT®
Polishing pads
1/2" socket wrench insert For TX screws, long
Split pin ISO/WN 1234 steel zinc-plated
Premium lambswool
Steel zinc plated cs hd square white head shape C
