Quick-action clamping nut Fixtec
Quick action lock nut Fixtec for angle grinder
QCKLOKNUT-FIXTEC-F.ANGLGRIND-UPTO150MM
Register now and access more than 125,000 products
For angle grinders up to max. Ø 150 mm with commercially available M14 spindle thread
If necessary, quick-action nut can also be loosened with face wrench
- Holes are located below the clip
- Use suitable face wrench
Once the clamping flange and separating or roughing wheel are mounted, the free grinding spindle length must be at least 3 mm.
Datasheets(X)
Fold up clip and screw nut on clockwise with grinding spindle locked. Fold clip back in.
 | |
Diameter | 49 mm |
Height | 9 mm |
Last viewed
Hexagonal bolt with threading up to head ISO 4017, steel, strength class 8.8, zinc flake, silver (ZFSHL)
3/4-inch impact socket wrench insert hexagon, metric, short
Metric double box-end wrench with POWERDRIV®
One-handed clamp from VIKING ARM
Attachment MSV 55-TS For ATS 18 AUTOMATIC M-CUBE
Support for Tipmatic Soft-close synchronisation rod
Handle
3/8" angled extension
Headband for welding helmet Stella
Safety boots S1P K57