Quick-action clamping nut Fixtec
Quick action lock nut Fixtec for angle grinder
QCKLOKNUT-FIXTEC-F.ANGLGRIND-UPTO150MM
Register now and access more than 125,000 products
For angle grinders up to max. Ø 150 mm with commercially available M14 spindle thread
If necessary, quick-action nut can also be loosened with face wrench
- Holes are located below the clip
- Use suitable face wrench
Once the clamping flange and separating or roughing wheel are mounted, the free grinding spindle length must be at least 3 mm.
Datasheets(X)
Fold up clip and screw nut on clockwise with grinding spindle locked. Fold clip back in.
 | |
Diameter | 49 mm |
Height | 9 mm |
Last viewed
Safety boots S1P K57
U-clip, type 4
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Nylon anchor For light loads (secondary attachments)
Sanding sponge
1/4-inch socket wrench insert, TX head For external TX screws
Klebfix 4-in-1 superglue
Hand-held rivet pliers For plastic blind rivets
Coloured cable ties with plastic latch
Wellington boot OB PVC