Push-through perforated sleeve SH for BASIC WIT-PM 200 and ALLROUNDER WIT-VM 250 PRO injection systems
Push-through perforated sleeve SH
ANC-SH-PLA-TRANP-16X330MM
Register now and access more than 125,000 products
- Anchor rods W-VI-A are held centrally in the perforated sleeve during installation
- The perforated sleeve collar can be shortened to the appropriate fixture thickness (wooden beam + plaster thickness)
- Individual fixing point in masonry: BASIC WIT-PM 200, anchor rod W-VI-A, conventional threaded rod with acceptance certificate
- Individual fixing point in masonry: ALLROUNDER WIT-VM 250, anchor rod W-VI-A, conventional threaded rod with acceptance certificate
Datasheets(X)
CAD data (available after login)
For anchoring in solid and perforated brick masonry
Type description | SH 16 x 130/200 |
Diameter | 16 mm |
Length | 330 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 16 mm |
Drill hole depth (h 0) - condition | 135 mm (+t fix) |
Effective anchoring depth (h ef) | 130 mm |
Suitable for anchor rod | M8 |
Suitable for female thread sleeve | 0 - not applicable |
Required injection mortar | WIT-PM 200, WIT-VM 250 |
Approval | ETA-13/0037, ETA-20/0854 |
Last viewed
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Car tester
Metric double box-end wrench with POWERDRIV®
Compressed air conditioning unit Size 1
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Bond and Seal All-in-One structural adhesive
Pin housing Deutsch DT series OEM quality
Silicone spray
Tyre gloss Silver Line
3-pin connector 6V - 24V