Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M8-6SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 6 mm² |
Flange hole | M8 |
Wire diameter (d1) | 3.5 mm |
Diameter of hole (d2) | 8.4 mm |
Distance between sleeve end and centre of hole (e) | 23.0 mm |
Sleeve length (a) | 9.5 mm |
Width (b) | 15.0 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Magnetic dish
1/2-inch impact socket wrench insert For hexagon socket screws, metric, long
Steel zinc plated cs hd square white head shape C
1/2" socket wrench insert Inch, short
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Pass-through ratchet
1/2 inch impact socket wrench insert hexagon, metric, short
Occupational boots O1 FC16
O-ring, imperial NBR 70
System insert 8.4.1, combination wrench