Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M8-50SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 50 mm² |
Flange hole | M8 |
Wire diameter (d1) | 10 mm |
Diameter of hole (d2) | 8.4 mm |
Distance between sleeve end and centre of hole (e) | 37 mm |
Sleeve length (a) | 19 mm |
Width (b) | 20 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Support for Tipmatic Soft-close synchronisation rod
Pressure reducing valve
Safety boots S2 HERA QUICK RELEASE
Screwdriver set For hexagon head screws
1/2 inch socket wrench insert metric, hexagon, short
Split pin ISO/WN 1234 steel zinc-plated
Interior trim clip, type 2
High-gloss polish P20 Plus
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated black (A2S), with H cross recess.
WÜPOFAST® zinc-plated blue chipboard screw