Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M8-10SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 10 mm² |
Flange hole | M8 |
Wire diameter (d1) | 4.5 mm |
Diameter of hole (d2) | 8.4 mm |
Distance between sleeve end and centre of hole (e) | 25.0 mm |
Sleeve length (a) | 10.5 mm |
Width (b) | 15.0 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Welding glove W-130
Assembly wedge set 12 pieces
Drilling stand DS Comfort
Clay series cleaning pad
Point chisel Plus Longlife & Speed
Hammer drill bit Max Quadro-L Vario
Scraper blade
System insert 4.4.1, empty compartment
High Power battery
4 in 1 metric ratcheting double box-end wrench With POWERDRIV® drive