Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M12-25SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-wire round conductors, such as compliant with DIN EN 60228 Class 2
for round-pressed sector cables
 | |
Wire cross section | 25 mm² |
Flange hole | M12 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 35.5 mm |
Sleeve length (a) | 15 mm |
Width (b) | 19 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Zinc clip-on wheel weight For car aluminium rims
Fleece jacket Nepal
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
High-vis vest With hook-and-loop fastener
TX bit with hole
1/2 inch socket wrench insert metric, hexagon, short
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Flat washer For hexagon head bolts and nuts