Welcome to Würth Greece For trade customers only

Lock cylinder spray

Lock cylinder spray
CLOSCYLSPR-CARDBOARD-50ML

Art.-no. 0893052
EAN 4046777964240
Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

For the care of all types of locks
  • Excellent creep properties ensure very good moisture displacement. This prevents freezing in winter.

  • Contains corrosion protection additives for long-term protection

  • Resin- and acid-free, meaning sensitive components are not attacked

  • Silicone free
Notice

Do not additionally lubricate with graphite powder

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For maintaining all types of locks.

Instructions

Insert the capillary tube into the lock and spray briefly.

Chemical basis

Mineral oil

Colour

Light brown

Smell/fragrance

Perfumed

Density

0.71 g/cm³

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

Contents

50 ml

Container

Aerosol can in a display box

Shelf life from production

24 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information