Knife blade, curved
Cutting knife bent
CUTKNFE-WNDWREP-BENT-L35MM
Register now and access more than 125,000 products
Conversion of Fein part numbers to Würth part numbers.
The three digits after 639 03 ... in the original Fein number or the three-digit number stamped on the knives are crucial.
If the number starts with 0, e.g. 095, 0 is replaced by 5 and the prefix 0696 is added to this value. In this case, the Würth part number would be as follows: 0696 595.
If the number starts with 1 or 2, e.g. 126, 5 is inserted between 1 and 2, and the prefix 0696 is added to this value. In this case, the Würth part number would be as follows: 0696 512 6.
Datasheets(X)
Cutting edge length | 35 mm |
Last viewed
Electrical insulating tape
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Screwdriver slotted short with round shank
Insect remover
Flat brush LM ECONOMY For solvent-based paints
Easy Clean dry cleaner
C 6.3 TX bit (1/4 inch) with borehole
1-ear clamp with insert ring
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Anti-hologram polish P30 Plus