Jump starter, 12-V Li-ion, Booster Light
Jump starter, 12-V Li-Ion, Booster Light
JUMPSTRT-(LIIONBOOSTER-LIGHT)-12V
Register now and access more than 125,000 products
Quality in a compact design
- Use of high-quality materials and components.
- Good performance values thanks to high-quality Li-ion battery, robust cables and clamps.
- Handy format thanks to the Li-ion technology and well-thought-out design.
User-friendly and multifunctional
- Very simple to operate – connect, switch on, start.
- LED display for checking the charge status of the internal battery.
- Charging via USB possible using a socket or cigarette lighter connector.
- Can be used as a power bank thanks to USB output
- 7-mode LED light
Safe and reliable
- Protected against polarity reversal, sparks, overcharging, overvoltage and overheating.
- Compliance with all relevant standards
Scope of delivery
- Li-ion Booster Light
- USB cable
- Adapter 230 V USB socket
- 12 V USB cigarette lighter adapter
- User handbook
- Storage bag
The device must only be operated by qualified authorised persons. All persons involved with commissioning, operation, and maintenance of the device must be suitably qualified.
The override mode must be used with extreme caution and only in exceptional cases as spark and reverse polarity protection are switched off!
Datasheets(X)
Vehicles with diesel/petrol engines and 12 V electrical system.
1. Switch off the vehicle and remove the ignition key.
2. Connect the switched-off and fully charged jump starter.
3. First connect the red plus terminal to the positive battery terminal, then the black minus terminal to an earth point on the vehicle.
4. Switch on the jump starter and start the vehicle.
5. If necessary switch on override mode, if the vehicle battery is deeply discharged or the jump starter power is not sufficient.
5. Switch off the starter, then first remove the minus terminal followed by the plus terminal.
6. Recharge jump starter.
Type description | Li-ion Booster Light |
Type of rechargeable battery/battery | Li-lon |
Output voltage | 12 V/DC |
Nominal current | 300 A |
Max. current | 1000 A |
Rechargeable battery/battery capacity | 2150 mAh |
Wire cross section | 8.34 mm² |
Height | 43 mm |
Width | 183 mm |
Depth | 85 mm |
Product weight (per item) | 700 g |
Last viewed
Hot air burner For Turbojet and Powerjet soldering guns
WÜPOFAST® A2 PZ Particle board screw
Maintenance oil Multi
Split pin ISO/WN 1234 steel zinc-plated
HSS type RN twist drill bit box 19 pieces
SL locking device
Metric combination wrench with POWERDRIV®
Work vest WANTED
Hammer drill bit multi-pack with SDS-plus drive arbor Duo-S Vario 12 pcs
Strip fuse, DIN 72581, plastic