High-temperature joint grease

Name: High-temperature joint grease
Brand: Würth
SKU: 0892820

High-temperature joint lubricant
JNTGRSE-HINGE-HIGHTEMPERATURE-TUBE-90G

Art.-no. 0892820

EAN 4058794934946

All versions

Prices for customers after login

High-temperature joint grease

Art.-no. 0892820

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

Lithium complex-soap, mineral-oil-based lubricating grease with additives to improve corrosion, oxidation and wear protection

Resistant to oxidation - protects against corrosion

Good wear protection

Good load-bearing capacity

Emergency running features

Suitable for low sliding velocities

Suitable for oscillating applications

Acid-, resin-, silicone- and AOX-free

Notice

Thoroughly clean dirty lubrication points.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

This high-temperature joint grease is a lithium complex soap grease on the basis of mineral oil with additives to improve corrosion and oxidation protection, wear protection and load bearing capacity.

Chemical basis	Lithium complex
Colour	Black
Smell/fragrance	Characteristic
Density	0.98 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-30 °C
Max. temperature conditions	160 °C
Min. dripping point	220 °C
Water-soluble	No
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
NLGI grade	1-2
Behaviour in the presence of water	1-90
Conditions for behaviour in the presence of water	in accordance with DIN 51807-1
Min. worked penetration	290 x 0.1 mm
Max. worked penetration	310 x 0.1 mm
Worked penetration conditions	in accordance with DIN ISO 2137
Oxidation-resistant	DIN 51808
Weight of content	90 g
Container	Tube
Shelf life from production	36 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.