Grommet Brass, MS 63 F 30, nickel-plated
Rosette brass nickel-plated, shape 1
ROS-BRS-(E2J)-8,0X16,0X3,2
Register now and access more than 125,000 products
Grommets are used as a spacer for various countersunk screws. They are used as washers and alignment aids, as well as to equalise the pressure on the parts that need to be secured, particularly if soft materials such as wood, plastic, leather, etc. are used.
 | |
Internal diameter (d1) | 8 mm |
Outer diameter (d2) | 16 mm |
Height (h1) | 3.2 mm |
Standards | DIN 17670 |
Material | Brass |
Surface | Nickel plated |
Datasheets(X)
CAD data (available after login)
Last viewed
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Thread die HSS DIN EN 22568 for standard metric ISO threads
Oil filter chain wrench, extra strong
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Oil drain plug
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Neutral silicone Special
1/2 inch socket wrench insert metric, hexagon, short
Hand tap, taper tap HSS DIN 352
