Fixanchor W-FA/F - ANC-(W-FA/F)-(HDG)-15/30-M12X110

Fixanchor W-FA/F - ANC-(W-FA/F)-(HDG)-15/30-M12X110 - 1

Fixanchor W-FA/F - ANC-(W-FA/F)-(HDG)-15/30-M12X110 - 2

Fixanchor W-FA/F - ANC-(W-FA/F)-(HDG)-15/30-M12X110 - 3

Fixanchor W-FA/F

Name: Fixanchor W-FA/F
Brand: Würth
SKU: 5932912110

Fixanchor W-FA steel hot dip galvanized
ANC-(W-FA/F)-(HDG)-15/30-M12X110

Art.-no. 5932912110

EAN 4049557764115

All versions

Similar products

Prices and availability visible after login

Fixanchor W-FA/F

Art.-no. 5932912110

Prices and availability visible after login

Quantity

x 25 pcs

Show availability in Würth shop

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

Stud anchor for standard applications in non-cracked concrete. Hot-dip galvanised steel

Time-saving push-through installation

Immediate load-bearing capacity — no waiting

Torque-controlled expanding anchor made from hot dip galvanised steel

Two anchorage depths — wide range of applications

Proof of Performance

ETA-02/0001 for individual fixing point, option 7, uncracked concrete

Application area

Heavy steel structures

Fence systems

Post support bracket

Create the drill hole

Knock in anchor with mason's mallet or machine setting tool

Set anchor in place

Apply torque

ETA-02/0001 for individual fixing point, option 7, uncracked concrete

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Individual fixing point: Normal weight concrete C20/25 to C50/60 (uncracked concrete)

Suitable for fastening metal structures, metal profiles, brackets, base plates, supports, cable conduits, pipes, wooden structures, beams, purlins etc.

For use in concrete < C20/25 and pressure-resistant natural stone (without approval)

The anchor may be used for anchorages with predominantly static loads (e.g. tare weight, fittings, stored materials) or quasi-static loads (e.g. façades, staircase railings)

W-FA/F may only be used in dry indoor conditions


Metric anchor diameter	M12
Anchor length (l)	110 mm
Material	Steel
Surface	Hot dip galvanized
Attachment height (t fix)	15 mm
Max. attachment height reduced (t fix, red)	30 mm
Attachment height (t fix 2)	30 mm
Drill hole depth (h 1)	90 mm
Drill hole depth reduced (h 1, red)	75 mm
Drill hole depth (h 1.2)	75 mm
Effective anchoring depth (h ef)	65 mm
Effective anchoring depth reduced (h ef, red)	50 mm
Effective anchoring depth (h ef 2)	50 mm
Embedding depth (h nom)	82 mm
Embedding depth (h nom,red)	67 mm
Width across flats	19 mm
Nominal drill-bit diameter (d 0)	12 mm
Torque during anchoring (T inst)	40 Nm
Through-hole in the component to be connected (d f)	14 mm
Thread length (L th)	65 mm
Approval	ETA-02/0001

Performance data
Anchor diameter [mm]			M6		M8		M10		M12		M16		M20
Standard effective anchorage depth/reduced effective anchorage depth		h_ef/h_ef red [mm]	40	30	44	35	48	42	65	50	82	64	100	78
Admissible centric tension load¹⁾on an individual anchor without the influence of the edge distance	Compressive zone (uncracked concrete) C20/25²⁾, s ≥ 3 h_ef c ≥ 1.5 h_ef)	N_adm [kN] = C20/25^2⁾	4,1	2,9	5,7	5,0	7,6	6,5	12,6	8,5	17,8	12,3	24	16,5
Admissible shear load¹⁾on an individual anchor without the influence of the edge distance	Compressive zone (uncracked concrete C20/25²⁾, c ≥ 10 h_ef)	V_adm [kN] = C20/25^2⁾	2,9	2,9	6,3	5,0	8,0	6,5	14,3	8,5	23,6	23,6	37,1	33,1
Admissible bending moment		M_adm [Nm]	5,1	5,1	13,1	13,1	25,7	25,7	44,6	44,6	99,9	99,9	195	195
Fire resistance rating (W-FA/S)		F30 [kN]	0,9	-	1,4	-	2,2	-	3,2	-	6,0	-	10,0	-
		F60 [kN]	0,5	-	0,8	-	1,2	-	1,8	-	3,4	-	5,25	-
		F90 [kN]	0,3	-	0,5	-	0,8	-	1,2	-	2,2	-	3,6	-
		F120 [kN]	0,25	-	0,4	-	0,6	-	0,9	-	1,7	-	2,75	-
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of γ_F = 1.4 have been taken into account. For information on combining tensile and shear loads, on the influence of the edge distance, and on anchor groups, please refer to the European Technical Approval Guidelines (ETAG), Annex C. ²⁾ The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths.

Characteristic values
Embedment depth	h_nom/h_nom,red[mm]	49	39	56	47	62	56	82	67	102	84	121	99
Nominal drill ∅	d₀ [mm]	6	6	8	8	10	10	12	12	16	16	20	20
Drill cutting ∅	d_cut ≤ [mm]	6,4	6,4	8,45	8,45	10,45	10,45	12,5	12,5	16,5	16,5	20,55	20,55
Drill hole depth	h₁/_h1,red ≥ [mm]	55	45	65	55	70	65	90	75	110	95	130	110
Through hole in the component being connected	d_f ≤ [mm]	7	7	9	9	12	12	14	14	18	18	22	22
Torque while installing anchor (W-FA/S, zinc-plated steel)	T_inst = [Nm]	8	8	15	15	30	30	50	50	100	100	200	200
Torque while installing anchor (W-FA/F, hot-dip galvanised steel)	T_inst = [Nm]	-	-	15	15	30	30	40	40	90	90	120	120

Individual fixing point
Uncracked concrete, option 7 (ETA-02/0001 - zinc-plated steel and hot-dip galvanised steel)
Anchor diameter [mm]		M6		M8		M10		M12		M16		M20
Standard effective anchorage depth/reduced effective anchorage depth	hef/hef,red [mm]	40	30	44	35	48	42	65	50	82	64	100	78
Axis distance	s_cr,N [mm]	120	90	132	105	144	126	195	150	246	192	300	234
Edge distance	c_cr,N [mm]	60	45	66	53	72	63	98	75	123	96	150	117
Minimum axis distance	s_min [mm]	35	35	40	40	55	55	75	100	90	100	105	140
Minimum edge distance	c_min [mm]	40	40	45	45	65	65	90	100	105	100	125	140
Minimum member thickness	h_min [mm]	100	80	100	80	100	100	130	100	170	130	200	160

Additive article:

Product

Description

Quantity

Price
/PU

Machine setting tool

MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)

Art.-no. 0904908016

For quick and convenient hammering in of Würth fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a hammer drill

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).