FI-Cleaner vehicle cleaner

Name: FI-Cleaner vehicle cleaner
Brand: Würth
SKU: 0890120

Vehicle cleaner FI-Cleaner
CLNR-VEH-IN-FI-1000ML

Art.-no. 0890120

EAN 4050641086136

All versions

Similar products

Prices for customers after login

FI-Cleaner vehicle cleaner

Art.-no. 0890120

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

Cleans powerfully yet gently

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Seat covers, neck supports, carpets, vehicle ceiling, door claddings, soiling in the luggage compartment etc.

Instructions

Simply spray vehicle interior cleaner, let it take effect briefly and then remove the loosened dirt with a brush, cloth or sponge.

Vehicle interior cleaner can be diluted up to a mixing ratio of 1:10.

Contents	1 l
Container	Spray bottle
Smell/fragrance	Characteristic
Colour	Yellow
Chemical basis	Nonionic tenside
pH value	11.2
Density/conditions	1.04 g/cm³ / at 20°C
Shelf life from production	24 Month
Bio-degradable	Yes
AOX-free	No
Silicone-free	Yes

Suitable glove:

Product

Description

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove made from chloroprene and latex

Description:

Permeation level: 6

Cotton flocking on the inside

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.