Exterior Acrylic Sealant Standard Line

InstructionsDuring application, environmental temperature should not be lower than 5ºC. Avoid days with very high atmospheric humidity, since this slows down water evaporation from the sealant mass, preventing its drying. The substrate must be free of soiling, dust, oils etc. Clean using a wire brush and then blow with compressed air, when available. To avoid staining the joint borders, place self-adhesive masking tape and remove it immediately after sealing (before the material hardens). Place the cartridge in the special gun and make a slanted cut on the nozzle, forming an opening according to the application width. Place the material on the joint. If the material surface requires evening out, use a joint knife immediately after placement. Within 5 minutes, a surface membrane starts forming. After that, immediately remove masking tape. Maintain correct joint dimensioning. The joint depth must be equal to half its width.