Drilling screw, round head with collar and H cross recess pias®
pias steel zinc plated pan head H with flange
SCR-DBIT-PANHD-FLG-H2-(A3K)-4,2X25
ZEBRA PIAS
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
- The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks
- Contact pressure during use approx. 100 N/screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected.
For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
CAD data (available after login)
The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.
Last viewed
Rivet nut pliers
Plastic blind rivet with rounded mandrel
Rechargeable battery For Würth power tools Li-ion 12 volt
Exhaust nut with flange Steel 6, copper-plated
Circlip
E 6.3 TX bit (1/4 inch) with borehole
Multi-point housing for flat plug-in sleeves 2.8 x 0.5 mm
Hexagon tapping screw DIN 7976 A2 stainless steel, plain, shape C (with tip)
Sealing ring, copper, shape A
O-ring, metric