Digital calliper RW Edition
Digital calliper RW Edition
CAL-DGT-(RW EDITION)-(0-150MM)
Prices and availability visible after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at 2106290800.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Callipers with calibration certificate and a measuring range of 150 mm
- Digital callipers with Reinhold Würth signature
- Measuring range up to 150 mm
- Two buttons for switching on/off/zero and metric/inch
- Very easy-to-read display, even from wider viewing angles
- Long service life and reliable measurements due to reinforced plastic housing and ground measuring jaw
- Easy transfer of measurement results using the locking screw on the top to lock
- Automatic shutdown after approx. 20 minutes
- Thread table on the rear of the callipers and in the plastic box
- Scope of delivery: 1x digital callipers, 1x CR2032 button cell, 1x plastic box, 1x calibration certificate
Notice
- Keep the callipers clean and dry. Fluid can damage the slide
- Surfaces should be carefully cleaned with cotton fabric
- Never use petrol, acetone or other organic solvents
- Never apply voltage to parts of the digital callipers (e.g. engraving with an electric pin) as this may damage the circuit
Product information
Datasheets(X)
Application area
- The RW Edition digital callipers are ideal for precise measurements in metal processing work, mechanical engineering, quality control and workshops
- With a measuring range of 150 mm and a calibration certificate, it is ideal for professional use
Absolute length measuring accuracy | 0.03 mm |
Digit increment | 0.01 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Last viewed
Thread sealant paste
Microfibre cloth Clean & Polish
WÜPOFAST® A2 PZ Particle board screw
Male thread plug-in nipple
Internal lens For WSC 9-12 welding caps
Circlip For bore hole shape J DIN 472 plain stainless steel
Twist drill bit HSS DIN 338 type RN 118°
PVC pneumatic hose
Flat brush LM ECONOMY For solvent-based paints
Cordless hammer drill ABH 18 COMPACT M-CUBE