Closed-end blind rivet, dome head ISO 15975 dome head aluminium/aluminium
ISO 15975 flat head aluminium/aluminium
RIV-ISO15975-ALU/ALU-(2,0-5,0)-3,2X9,5
Register now and access more than 125,000 products
"ISO-standardised" closed-end blind rivet
The dimensions and tolerances defined in EN ISO 15975 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 3.2 x 9.5 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. grip range | 2.0-5.0 mm |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
ISO | 15975 |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 460 N |
Tensile fracture load | 540 N |
Head type | Dome head |
Last viewed
Oil drain plug
Smartphone pocket With convenient hook-and-loop fastener
Mechanic's glove
Inner external front shield
Mobile charging station mode 2 type 2 UNI
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Mechanic's glove
Jigsaw blade, wood, two stars
O-ring, imperial NBR 70
3/8" socket wrench insert For external TX screws, short