Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X50
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 7 mm |
Length (l1) | 50 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752, DIN 1481 |
Last viewed
Exhaust slotted nut, reduced wrench size DIN 14441 heavily copper-plated steel
Sabre saw blade, construction, three stars For brick/aerated concrete
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Female thread plug-in nipple
Ear plugs x-200
Flat blunt-ended file DIN 7261, shape A
Hexagonal nut
HHS® Clean adhesive lubricant pre-cleaner
Slipper S2 safety shoe