Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X40
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 7 mm |
Length (l1) | 40 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752, DIN 1481 |
Last viewed
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, A2 stainless steel
Plastic cover cap with sealing lip for pan head screw
Screwdriving tool For stair bolts
Cylinder tapping screw, C shape with hexagon socket
Body saw blade with flat adapter
Abrasive cloth Roll, metal
Thread repair single set TIME-SERT® 14 pieces
Pneumatic angle impact wrench DWSS 1/2 inch COMPACT
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
3/8 inch internal extractor, long