Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-5X24
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 24 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
Metric combination wrench with POWERDRIV®
3/4" POWERDRIV® socket wrench insert metric, hexagon
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Seat cutter Time-Sert, UNC thread
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Multiple plug housing for push connectors 2.8 x 0.5 mm
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain