Burnishing roller
Burnishing Roller Sanding Fleece
SNDROLL-FLC-G180-100X100MM
Register now and access more than 125,000 products
- With 6 mm keyway and 19 hole for surface grinding machines
- Medium hardness
- Synthetic corundum
- Synthetic resin-bound sanding segments
- Produces impressive surfaces on stainless steel, copper, aluminium, brass etc. Also for cleaning oxide coatings and for smoothing plastics and wood.
- Circumferential speed: Specified by the machine used, but no more than 30 m/s = 3700 rpm
General working instructions: At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wear.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Attention: Pay attention to the running direction! Tools are only suitable for clockwise rotation.
Datasheets(X)
Produces impressive surfaces on stainless steel, copper, aluminium, brass etc. Also for cleaning oxide coatings and for smoothing plastics and wood.
Materials to be processed: Forged steel, malleable cast iron, grey cast iron, carbon steel, deep-drawn steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood.
Diameter x width x drill hole | 100 x 100 x 19 mm |
Grid size | 180 |
Material to be processed | Cr-Ni and other stainless steels, C-steel, Grey cast iron, Wood, Non-ferrous metal, Forged steel, Steels bands, Malleable cast iron, Deep-drawn steel, Injection-moulded zinc |
Last viewed
Basic dungarees
Hose clamp set, strap width: 12 mm 111 pieces
Car Windscreen Wiper Flat blade Multi RedLine
Screw seal, self-centring
Combination wrench, inch with POWERDRIV®
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Blade receptacle Uninsulated
Zinc clip-on wheel weight For car aluminium rims
Stainless steel care spray
Work trousers ENERGY STRETCH