Brake cylinder rubber grease

Name: Brake cylinder rubber grease
Brand: Würth
SKU: 0893980

Brake cylinder paste
PAST-BRKCYL-TUBE-180G

Art.-no. 0893980

EAN 4045989911738

All versions

Prices for customers after login

Brake cylinder rubber grease

Art.-no. 0893980

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 2106290800

Fully synthetic brake cylinder paste for hydraulic brake systems

Keeps sleeves supple

Compatible with DOT 3, DOT 4, DOT 5.1 brake fluid

Protects against corrosion

Extends the brake cylinder service life

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For lubricating cylinder bores and pistons

Instructions

Apply a thin and even layer of brake cylinder paste

Do not use mineral lubricants

Weight of content	180 g
Colour	Yellow
Smell/fragrance	Characteristic
Chemical basis	Synthetic oil with a multifunction additive combination
Shelf life from production	36 Month
Density	1 g/cm³
Density conditions	at 20°C
Min. flashing point	240 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.