Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
ISO 15984 countersunk head stainless steel A2/A2
RIV-ISO15984-A2/A2-(4,5-6,5)-4,0X10,0
Register now and access more than 125,000 products
Sleeve: A2 stainless steel; mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15984 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 8.4 mm |
Head height (k1) | 1.7 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 4.5-6.5 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 2700 N |
Tensile fracture load | 3500 N |
Nominal diameter x length (Ø d x l) | 4 x 10 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Terminal block without wire guard
Work vest WANTED
Halogen bulb
Metric double open-end wrench DIN 3110/ISO 1085
Hand-lever grease gun For 400 g cartridges
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Nitrile chemical protective glove With cotton velour finish inside
Hexagon socket bit
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
SL locking device