2K anchoring mortar, special compound WIT-P 200
ANC-MORT-(WIT-P200)-CART-300ML
Register now and access more than 125,000 products
- Cost-effective polyester-based anchoring mortar
- Styrene-free, especially suitable for fixings in perforated brick masonry
- Cures quickly even at low temperatures
- No expansion; small edge and axial clearances can be maintained
- The cartridge can be used until the end of its shelf life, provided that the mixing nozzle is replaced and/or the cap is reclosed
- The recommended maximum processing temperature during installation is +24°C (long-term) / +40°C (short-term)
- Processing temperature of the mortar:
- Minimum +5°C
- Transport and storage temperature (cartridge):
- +5...+25°C
- Minimum shelf life, when stored correctly:
- 12 months
The anchoring mortar can be used for fixings in the following materials: Masonry and non-cracked concrete C20/25
Fixings in solid brick and non-cracked concrete without sleeve anchor
Fixings in perforated brick with sleeve anchor
Masonry: Stud screw WIT-AS, internally threaded sleeve anchor WIT-IG, plastic sleeve anchor WIT-SH
Non-cracked concrete: Stud screw W-VI-A/S; W-VI-A/A4
Contents | 300 ml |
Min./max. ambient temperature / Conditions | 24 to 40 °C / after completely curing process |
Temperature resistance, long-term temperatures max. | 24 °C |
Temperature resistance, short-term temperatures max. | 40 °C |
Shelf life from production/conditions | 18 Month / at 5°C to 25°C |
Chemical basis | Two-component polyester |
Colour | Sand beige |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!